.jpg?width=728&height=480&name=profili-angolari-alluminio-per-pareti-mobili-5-vantaggi-che-non-pensavi.i1261-k8TBnT-w600-l2%20(1).jpg)
Aluminum angle bars are corner extrusions manufactured in different sizes and shapes. Profall offers a wide range of these products: take a look at our catalog and our incredible service!
On this page, you will find:
In our catalog, you will find a multitude of products, both standard and special. Here we have summed up the characteristics and sizes of our aluminum angle bars. Let’s take a look:
Aluminum corner extrusions with even sides are standard extrusions whose sides have the same size. They are developed by resorting to the 1050, 1070, 3103, and 6060 aluminum alloys and have dimensional tolerances of +/- 0.15 mm on the side.
Thus, these aluminum angle sizes are proportional. They are mostly used in applications concerning the electronics, furnishings, robotics, and construction sectors, and can be demanded with a minimum order quantity of 200 kg.
Here is a table with all the sizes of this type of aluminum angle bar:
|
Height |
Base |
Thickness |
|
10 mm |
10 mm |
from 1 to 2 mm |
|
12 mm |
12 mm |
from 1 to 2 mm |
|
15 mm |
15 mm |
from 1 to 3 mm |
|
20 mm |
20 mm |
from 1 to 4 mm |
|
25 mm |
25 mm |
from 1.5 to 4 mm |
|
30 mm |
30 mm |
from 1.5 to 5 mm |
|
35 mm |
35 mm |
from 1.5 to 4 mm |
|
40 mm |
40 mm |
from 1.5 to 4 mm |
|
45 mm |
45 mm |
from 2 to 3 mm |
|
50 mm |
50 mm |
from 2 to 5 mm |
Aluminum corner extrusions with uneven sides are standard extrusions whose sides differ in size. They are developed by resorting to the 1050, 1070, 3103, and 6060 aluminum alloys and have dimensional tolerances of +/- 0.15 mm on the side.
This means that these aluminum angle sizes are not proportional, thus you might find unequal legs with different dimensions. They are meant to adapt to mechanical, electromechanical, construction, and domestic applications and can be demanded with a minimum order quantity of 200 kg.
Here is a table with all the sizes of this type of aluminum angle bar:
|
Height |
Base |
Thickness |
|
10 mm |
5 mm |
1.5 mm |
|
12 mm |
3 or 6 mm |
from 1 to 1.2 mm |
|
15 mm |
10 mm |
from 1 to 2 mm |
|
19 mm |
11 mm |
2 mm |
|
20 mm |
10, 15, 18, |
from 1.5 to 3 mm |
|
22 mm |
12 mm |
2 mm |
|
25 mm |
10, 12, 15, |
from 1.5 to 3 mm |
|
30 mm |
10, 11, 12, 15, |
from 1.5 to 4 mm |
|
35 mm |
10, 15, 20, or 25 mm |
from 1.5 to 4 mm |
|
40 mm |
10, 15, 20, |
from 2 to 4 mm |
|
50 mm |
20, 25, or 30 mm |
from 1.5 to 3 mm |
|
60 mm |
30 or 40 mm |
from 2 to 4 mm |
Finally, aluminum angle bars with cross section are special extrusions with specific shapes and sizes. They are developed resorting to the 6060 aluminum alloy, one of the most high-quality and versatile.
They found widespread use as finishing elements in the automotive and transportation industries and can be ordered in the bar format for a minimum of 200 kg.
These aluminum angles have sizes that strictly depend on the specific code of the products, thus I suggest you take a look at the product page and choose the model that most suits your needs: Aluminum corner profiles with special cross section
